HRXBM-Cantilever Submerged Arc Welding Machine

  HRXBM-cantilever submerged arc welding machine is the special equipment used by box beam manufacturers for submerged arc welding of box beam. The submerged arc welding of box beam generally adopts single arc single wire or double arc double wire welding. It mainly consists of electric moving frame, automatic submerged arc welder, flux conveying and recycling system, slide plate, lifting arm, guiding device, electric control system and other components. The moving speed of the portal frame can be adjusted by frequency changer to meet the needs of different welding speed. Two sets of lifting arms and sliding plates are installed on the cross beam, and the guide device is installed on the bottom of the lifting arm. Through the motor and transmission device, the lifting arm can move up and down, left and right, so as to better adjust and control the position of the welding torch, so as to adapt to the welding of different specifications. After setting the relevant parameters, one key starts. It is an automatic welding equipment with simple operation, convenient, highly efficiency and high automation.

  In addition, H beam and box beam dual-purpose welding machine HRDLM-gantry multi-function welding machine can be chosen for welding.

Technical Parameters